dc.contributor.advisor	Kumar, Mahesh
dc.creator.researcher	Ranwa, Sapana
dc.date.accessioned	2023-12-06T10:42:02Z
dc.date.available	2023-12-06T10:42:02Z
dc.date.awarded	2017-08
dc.date.issued	2016-11
dc.date.registered	2011-12
dc.description.abstract	Hydrogen is an emerging energy source which is known as "The fuel of future". It is extensively used in thermal power plants, hydrogen engines, fuel cells etc. Storage of hydrogen is quite challenging due to its highly inflammable nature even at 4% hydrogen in air. Therefore, for optimum surveillance of hydrogen gas, an energy efficient gas sensors with low operating temperature, high sensor response and selectivity, compact size and radioactive environmental stability are desired. 1-dimensional nanostructures grab all attention as they work as building blocks for miniaturized gas sensors with low power consumption. Nanorods based gas sensors show relatively high response at low working temperature even with minimal gas concentration. Detection at ppm level is achieved due to the availability of large surface reaction area with high surface to volume ratio. ZnO is wide band gap and n-type semiconductor material which have high thermal stability and high conducting electron mobility. This thesis mainly comprises of deposition of well-aligned ZnO nanorods and nanocrystalline thin films using sputtering technique where deposited ZnO nanorods are highly crystalline and are grown along c-axis with high optical properties and less number of intrinsic defects. Electrical characterization of ZnO nanorods/Si heterojuncton is also studied which shows rectifying behaviour along with strong dependence of barrier height on operating temperature. Deviation in Richardson constant is observed due to presence of barrier inhomogeneities at junction, which was further modified using double Gaussian distribution of barrier height. Then hydrogen sensing mechanism for Ohmic ZnO nanorods/Si heterojunction was proposed that gave fast response time of ~27 seconds at low operating temperature. For further enhancement of sensor response, Schottky contacted Au/ZnO nanorods based sensors were fabricated that showed sensors.	en_US
dc.description.note	col. ill.; including bibliography	en_US
dc.description.statementofresponsibility	by Sapana Ranwa	en_US
dc.format.accompanyingmaterial	CD	en_US
dc.format.extent	xvii, 136p.	en_US
dc.identifier.accession	TP00009
dc.identifier.citation	Ranwa, Sapana. (2017). RF Sputtered ZnO Nanorods based Hydrozen Sensor (Doctor's thesis). Indian Institute of Technology Jodhpur, Jodhpur.	en_US
dc.identifier.uri	https://ir.iitj.ac.in/handle/123456789/19
dc.language.iso	en
dc.publisher	Indian Institute of Technology Jodhpur
dc.publisher.department	Electrical Engineering	en_US
dc.publisher.place	Jodhpur
dc.rights.holder	IIT Jodhpur
dc.rights.license	CC-BY-NC-SA
dc.subject.ddc	RF Sputtered	en_US
dc.title	RF Sputtered ZnO Nanorods based Hydrogen Sensor	en_US
dc.type	Thesis

RF Sputtered ZnO Nanorods based Hydrogen Sensor

Files

Original bundle

Collections